FREE Teacher Planner - All Online Orders Over $499

Super Paint Sale - All 500ml is $4.99 Shop Now

Black Friday - Earn Triple Zart Rewards Points on Every Online Purchase.
1 3

MTN Canvas Spray Varnish UV Protectant 400mL

$2300 NZD (ex GST)
$2530 NZD (inc GST)
Taxes, discounts and shipping calculated at checkout.

Earn [points_amount] when you buy this item.

The MTN Canvas Spray Varnish UV Protectant 400ml is a specially formulated final coat sealant for oil and acrylic paints on canvas and board. A great protector against dust, grease, humidity and contamination. The built in UV protection ensures artwork won’t fade over time.

Suitable for indoor use only, this spray varnish is highly durable, self-levelling with good elasticity, re-paintable and completely transparent with no yellowing over time.

Gloss
The gloss finish will add that final touch to artworks while enhancing colour depth and sheen.
Matt
The matt finish will add that final invisible protection to artworks while reducing glare and reflections.

MTN  |  SKU: PTZ444-GL
Finish

Key Features

• Size: 400mL, covers approximately 2 x 2m
• Nozzle type: Soft cap – round 3.6cm medium-wide line
• Ideal for permanent media such as acrylic and oil paint, alcohol and water-based inks, spray paint, oil stick, paint markers
• UV light protectant stops artwork from fading
• Protects against dust, grease, humidity and contamination
• Suitable for indoor use only
• Touch dry in 1 hour, fully cured 12 hours
• Completely transparent and will not yellow over time
• Highly durable with good elasticity
• Safety: protective clothing and respirator mask recommended. Use in a well-ventilated area. Children must be supervised by an adult.

Additional Information

Instructions for use:

Before use, shake the aerosol vigorously for approximately one minute.
Artwork should be completely dry. Apply in thin coats at a distance of 15-20cm. To obtain a good quality finish, it is always best to apply three thin coats than one thick coat. Coats should be applied one hour apart.
For old and deteriorated artworks, do a prior cleaning and restoration of the surface and then proceed with the varnish coat. Oil paints should be dry before varnishing. Testing on a small area is recommended before applying to the entire artwork.
After use, hold the aerosol upside down and spray to purge the valve; this will stop the cap from clogging. If the nozzle is blocked, soak in solvent to restore.
When applied over other paints do a preliminary test first.

Specifications (PTZ444-GL)
  • Catalogue Page Number
    130